KORG Triton Studio - Manual (Page 217)

206
“Depth”=100, “Envelope Amount”=–100
034: Stereo Auto Pan
This Auto Pan effect pans sound between left and right. It is
stereo, and shifting the left and right LFO phases from each
other will simulate the sound of the left and right channels
crossing over each other by turns, or chasing each other.
a: LFO Shape
You can change the panning curve by modifying the LFO wave-
form.
b: LFO Phase
This parameter determines the difference in the left and right LFO
phases. When you change the value gradually from 0, the sound
from the left and right channels will chase each other around. If
you set the parameter to +180 or –180, the sound from each chan-
nel will cross over each other.
You need to input different sounds to each channel in order for
this parameter to be effective.
035: St. Phaser + Trml
(Stereo Phaser + Tremolo)
This effect has a stereo phaser and tremolo LFOs linked
together. Swelling phaser modulation and tremolo effects
synchronize with each other, creating a soothing modulation
effect. It is suitable for electric piano type sounds.
a
LFO Waveform
Selects LFO Waveform Triangle, Sine
LFO Shape –100...+100
Determines how much the LFO waveform is changed
☞
b
LFO Phase [degree] –180...+180
Sets the LFO phase difference between the left and right
☞
c
LFO Frequency [Hz] 0.02...20.00Hz
Sets the LFO speed
☞
Fx:009,
Src
Selects the modulation source of LFO speed Off...Tempo
Amt –20.00...+20.00Hz
Sets the modulation amount of LFO speed
d
BPM/MIDI Sync Off, On
Switches between using the frequency of the LFO speed and using
the tempo and notes
☞
Fx:009,
BPM
Selects MIDI Clock and assigns tempo MIDI, 40...240
☞
Fx:009
Base Note
Selects the type of notes that specify the LFO speed
☞
Fx:009
Times x1...x16
Sets the number of notes that specify the LFO speed
☞
Fx:009
e
Depth
Sets the depth of LFO modulation 0...100
Src Off...Tempo
Selects the modulation source of the depth of modulation
Amt –100...+100
Sets the modulation amount of the depth of modulation
f
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
Level
Louder
Time
Shimmer
LFO Frequency[Hz]=8.0
Envelope Amount[Hz]= –7.0Hz
Depth=100
Envelope Amount= –100 Dry Envelope
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO Phase
LFO Shape
Pan
Pan
LFO: Tri / Sin
Depth
a
Type: Phs - Trml...Phs LR - Trml LR
Selects the type of the tremolo and phaser LFOs
☞
LFO Phase [degree] –180...+180
Sets the phase difference between the tremolo and phaser LFOs
☞
b
LFO Frequency [Hz] 0.02...20.00Hz
Sets the LFO speed
☞
Fx:009,
Src
Selects the modulation source of LFO speed Off...Tempo
Amt –20.00...+20.00Hz
Sets the modulation amount of LFO speed
c
BPM/MIDI Sync Off, On
Switches between using the frequency of the LFO speed and using
the tempo and notes
☞
Fx:009,
BPM
Selects MIDI Clock and assigns tempo MIDI, 40...240
☞
Fx:009
Base Note
Selects the type of notes that specify the LFO speed
☞
Fx:009
Times x1...x16
Sets the number of notes that specify the LFO speed
☞
Fx:009
d
Phaser Manual
Sets the phaser frequency range 0...100
Resonance
Sets the phaser resonance amount –100...+100
e
Phaser Depth
Sets the phaser modulation depth 0...100
Src Off...Tempo
Selects the modulation source for the phaser modulation depth
Amt –100...+100
Sets the modulation amount for the phaser modulation depth
f
Phaser Wet/Dry –Wet...–2:99, Dry, 2:99...Wet
Sets the balance between the phaser effect and dry sounds
☞
L-In
Left Center Right
Output Stereo Image
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
LFO Phase = 0 degrees LFO Phase = 90 degrees LFO Phase = 180 degrees
Stereo Auto Pan - LFO Phase
Phaser
Phaser
Left
Right
Resonance
LFO Type
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Phaser Wet / Dry
Phaser Wet / Dry
LFO
LFO Phase
LFO Shape
Tremolo
Tremolo