KORG Triton Studio - Manual (Page 227)

216
a: BPM, b: Rhythm Pattern
With the tempo specified by the “BPM” parameter (or the MIDI
Clock tempo if “BPM” is set to MIDI), the length of one beat
equals the feedback delay time, and the interval between taps
becomes equal. Selecting a rhythm pattern will automatically turn
the tap outputs on and off. When “BPM” is set to MIDI, the lower
limit of the “BPM” is 44.
Reverb effects
These effects simulate the ambience of reverberation in con-
cert halls.
052: Reverb Hall
This hall-type reverb simulates the reverberation of mid-size
concert halls or ensemble halls.
053: Reverb SmoothHall
This hall-type reverb simulates the reverberation of larger
halls and stadiums, and creates a smooth release.
054: Reverb Wet Plate
This plate reverb simulates warm (dense) reverberation.
055: Reverb Dry Plate
This plate reverb simulates dry (light) reverberation.
b: Pre Delay [msec], b: Pre Delay Thru [%]
The “Pre Delay” sets the delay time to the reverb input, allowing
you to control spaciousness.
Using the “Pre Delay Thru” parameter, you can mix the dry sound
without delay, emphasizing the attack of the sound.
e
High Damp [%]
Sets the damping amount in the high range 0...100%
☞
Fx:043
Low Damp [%]
Sets the damping amount in the low range 0...100%
☞
Fx:043
f
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level
☞
Fx:037,
Src
Selects the modulation source for the input level Off...Tempo
☞
Fx:037
g
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
Reverb
a
Reverb Time [sec]
Sets the reverberation time 0.1...10.0sec
High Damp [%]
Sets the damping amount in the high range 0...100%
b
Pre Delay [msec]
Sets the delay time from the dry sound 0...200msec
☞
Pre Delay Thru [%]
Sets the mix ratio of non-delay sound 0...100%
☞
c
EQ Trim
Sets the EQ input level 0...100
d
Pre LEQ Gain [dB]
Sets the gain of Low EQ –15...+15dB
Pre HEQ Gain [dB]
Sets the gain of High EQ –15...+15dB
e
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
EQ Trim
+
EQ Trim
LEQ HEQ
Pre Delay Reverb
Pre Delay Thru
Reverb - Hall / Plate Type
Time
Level
Louder
Dry
Reverb
Pre Delay Thru
Pre Delay Reverb Time