KORG Triton Studio - Manual (Page 289)

278
There is no plug
There is no readable data
This file is already loaded
Track is full
U
Unable to create directory
Unable to save file
W
Word Clock Error !
Y
You can’t undo last operation Are you sure ?
You can’t undo this operation Are you sure ?
Meaning: The plug specified in the Global mode mLAN
Output/Input page does not exist.
Action: Execute the operation once again. If the same
error occurs, check whether the mLAN device
containing the specified plug is operating cor-
rectly.
Meaning: Either the file size is 0 or the file does not contain
data that can be accessed by the load or open
operation. Alternatively, the data is damaged etc.,
and cannot be loaded or accessed.
Meaning: When loading a divided .PCG file, you attempted
to load a file that had already been loaded.
Action: Load the .PCG files that have not yet been loaded.
Meaning: In the Disk mode Make Audio CD page, you
attempted to insert a track that would make the
total exceed 99 tracks.
Action: Cut unneeded tracks, and then execute the Insert
operation once again.
Meaning: You attempted to create a directory that would
exceed the maximum pathname length (76 charac-
ters for the full pathname).
Meaning: When executing the Disk mode Utility command
“Copy,” the copy destination path length
exceeded 76 characters.
Meaning: When saving a file in Disk mode or Song Play
mode, the save destination path exceeded 76 char-
acters.
Meaning: When you executed the Disk mode Utility page
menu command “Copy,” the file management
data exceeded the size of the management area.
Meaning: When you set “System Clock” to Word Clock (if
the EXB-DI is installed), the word clock was not
being input correctly.
Action: Check whether there is a problem with the BNC
cable.
Meaning: Once you enter event editing (even if you leave
event editing without actually editing an event), it
will no longer be possible to execute a Compare of
the previous edit. If you wish to enter event edit-
ing, press the OK button. To cancel, press the Can-
cel button.
Meaning: When you exit recording or event editing in
Sequencer mode, the memory area for Undo
(Compare function) is not allocated. If you wish to
keep the data that was just recorded or edited,
press the OK button. If you wish to return to the
previous data (i.e., to delete the data that was just
recorded or edited), press the Cancel button.
Meaning: When editing in Sequencer mode, memory area
for Undo (Compare function) cannot be allocated.
If you wish to execute the edit, press the OK but-
ton. (It will not be possible to return to the state
before editing.) If you decide not to execute the
edit, press the Cancel button.
Action: In order to allocate memory area for Undo (Com-
pare function), delete unneeded data such as
songs, tracks, or patterns. We recommend that
you save data to floppy disk before you execute
the edit operation.