Combination p9: edit–master fx, 9–1: master fx, 9–2: mfx 1 – KORG Triton Studio User Manual

Page 59: 9–3: mfx 2, 9–4: master eq, Select the master effects, turn them on, Parameter settings for mfx1, Parameter settings for mfx2, Parameter settings for master eq

Advertising
background image

48

☞For details on master effects, refer to p.182 “8. Effect

Guide.”

9–1: Master FX

Here you can select the type of each master effect, turn it
on/off, and make chain and master EQ settings.

9–1a: MFX1, 2

MFX1, 2

[000...089]

MFX1, 2 On/Off

[Off, ON]

Chain

[Off, On]

Chain Direction

[MFX1

MFX2, MFX2MFX1]

Chain Signal

[LR Mix, L Only, R Only]

Chain Level

[000...127]

9–1b: Return Level

Return 1, 2

[000...127]

9–1c: Master EQ Gain [dB]

Low

[–18.0...+18.0]

Mid

[–18.0...+18.0]

High

[–18.0...+18.0]

These settings are the same as in Program mode (

☞“Pro-

gram 9–1: Master FX”).

9–1: Page Menu Command

9–1A: Copy Master Effect

☞“Program P9: 9–1A: Copy Master Effect.”
However, the MIDI control channel that is specified by “Ctrl
Ch” of the MFX 1 and 2 pages will not be copied.

9–1B: Swap Master Effect

☞“Program P9: 9–1B: Swap Master Effect.”
However, the MIDI control channel that is specified by “Ctrl
Ch” of the MFX 1 and 2 pages will not be swapped.

9–2: MFX 1
9–3: MFX 2

Here you can set the parameters for the MFX 1 and 2 effects
that were selected in the Master FX page (

☞p.187).

9–2(3)a: Ctrl Ch

Ctrl Ch

[Ch01...16, G ch]

This parameter specifies the MIDI channel that will
control dynamic modulation (Dmod) for the master
effect.

G ch:

The global MIDI channel “MIDI Channel” (Global P1:

1–1a) will be used for control. Normally you will set this to
G ch

.

9–4: Master EQ

The master EQ is a three-band stereo EQ. It is located imme-
diately before the AUDIO OUTPUT (MAIN OUT) L/
MONO and R from the L/R bus, and adjusts the overall
tonal character of the sound (

☞p.239).

9–4a: Ctrl Ch

Ctrl Ch

[Ch01...16, G ch]

This parameter specifies the MIDI channel that will
control dynamic modulation (Dmod) for the master EQ.

G ch:

The global MIDI channel “MIDI Channel” (Global P1:

1–1a) will be used for control. Normally you will set this to
G ch

.

The MEQ High Gain and MEQ Low gain can be controlled
by assigning a modulation source to the “Low Gain Mod-
Src:” and the “High Gain Mod-Src:” functions on this page.

Combination P9: Edit–Master FX

9–1

9–1c

9–1a

9–1b

0–1A

9–1A

9–1B

9–1
9–2a

0–1A
9–4a

Advertising