KORG Triton Studio - Manual (Page 286)

Appendices
275
Memory full
Memory overflow
Memory protected
MIDI data receiving error
Multisample L and R are identical
N
No connection
No data
No medium
No node
No recording track specified
No space available on medium
No space available on medium
Do you want to make a divided file?
Not enough memory
Meaning: In Sequencer mode when editing a song, track or
pattern, the total data of all songs has used up all
of the sequence data memory, and further editing
is not possible.
Action: Delete other song data etc. to increase the amount
of free memory.
Meaning: While realtime recording in Sequencer mode,
there is no more free memory to accommodate the
recorded data, so recording has been forcibly
halted.
Action: Delete other song data etc. to increase the amount
of free memory.
Meaning: While receiving exclusive data in Disk mode
“Save Exclusive,” all remaining internal memory
was used up.
Action: If you are receiving two or more sets of exclusive
data, transmit them separately to the TRITON
STUDIO.
Meaning: In Disk mode, you attempted to load more sample
waveform data than there was free memory
capacity.
Action: In Sampling mode, execute Delete sample to cre-
ate free space in the sample waveform data area,
and re-load the data.
Meaning: The internal program, combination, song, drum
kit, or user arpeggio pattern is protected.
Action: In Global mode, turn off write-protect, and exe-
cute the write or load operation once again.
Meaning: While receiving MIDI exclusive data, the format
of the received data was invalid, for example
because the size of the data was incorrect.
Meaning: Since the destination (save location) L and R mul-
tisample numbers are the same, the editing opera-
tion could not be executed.
Action: Select a different multisample number for the L
and R of the destination (save location).
Meaning: In the Global mode mLAN Output/Input page
when you pressed the Cut button to break a con-
nection, the specified connection had not been set.
It is possible that the connection settings have
been changed from another device.
Action: Check the connection settings of the connected
mLAN device. If a connection has not been speci-
fied for the plug of the receiving device, or if it is
connected to a different output plug, it is possible
that the current display is out of date, so re-select
the mLAN Output/Input page to re-display the
page.
Meaning: When loading a Standard MIDI File, the file con-
tained no events.
Meaning: When you executed Samples in One Multisample
in “Export Smpl as AIFF/WAVE,” there were no
samples.
Action: Create sample data.
Meaning: When executing a command in Disk mode, no
media (floppy disk etc.) was inserted in the drive.
Action: Insert media such as a floppy disk, or mount the
drive.
Meaning: When you pressed the Connect in the Global
mode mLAN Output/Input page, no mLAN
device existed on the bus.
Action: Check whether an mLAN device is connected to
the EXB-mLAN. If it is connected correctly, check
whether it supports mLAN. (When the EXB-
mLAN option is installed)
Also check that the connected mLAN device is
operating correctly.
Meaning: When performing realtime multi-track recording,
you attempted to begin recording with no tracks
set to REC.
Action: Set the desired tracks for recording to REC.
Meaning: When you attempted to save or copy a file, or to
create a directory, there was not enough free space
on the floppy disk or other medium.
Action: Either delete an existing file, or exchange the
medium with one that has sufficient free space.
Meaning: When saving a .PCG or .KSF file, there was insuf-
ficient free space on the media. Please specify
whether you want to save the file in divided form.
Action: Press the OK button to save the file across multi-
ple volumes of media, or press the Cancel button
to cancel.
Meaning: When starting realtime recording in Sequencer
mode, the minimum amount of free memory
(such as memory for the BAR events up to the
recording start location) could not be allocated.
Action: Delete other song data etc. to increase the amount
of free memory.
Meaning: When executing “Load Exclusive,” you attempted
to load an .EXL file that required more than
1,048,576 bytes. Such a file cannot be loaded by
the TRITON STUDIO.