KORG Triton Studio - Manual (Page 216)

Ef
fect
205
Other modulation and pitch shift effects
032: Stereo Tremolo
This effect modulates the volume level of the input signal.
The effect is stereo, and offsetting the LFO of the left and right
phases from each other produces a tremolo effect between left
and right.
a:LFO Waveform
This parameter selects the LFO waveform. Vintage wave simu-
lates the characteristics of the tremolo created on a guitar ampli-
fier. Combining this effect with the Amp Simulation will make a
realistic, vintage tremolo amplifier sound.
b: LFO Phase [degree]
This parameter determines the difference between the left and
right LFO phases. A higher value will simulate the auto-pan effect
in which the sound is panned between left and right.
033: St. Env. Tremolo
(Stereo Envelope Tremolo)
This effect uses the input signal level to modulate a stereo
tremolo. You can simulate a tremolo effect that becomes
deeper as it fades out while the level gets lower.
d: LFO Frequency [Hz], d: Envelope Amount [Hz],
e: Depth, e: Envelope Amount
These parameters set the modulation via an envelope (input sig-
nal level).
The “LFO speed” is obtained by adding the “LFO Frequency”
value to the “Envelope Amount” value multiplied by the input
signal. The LFO modulation depth is obtained by adding the
Depth value to the “Envelope Amount” value multiplied by the
input signal level.
• The following example indicates that the “Depth” is 0 with an
LFO Frequency of 1.0Hz and the maximum input, and that
the “Depth” is 100 with a Frequency of 8.0Hz with zero input.
“LFO Frequency [Hz]”=8.0, “Envelope Amount [Hz]”=–7.0
Mod./P.Shift
a
LFO Waveform Triangle, Sine, Vintage, Up, Down
Selects LFO Waveform
☞
LFO Shape –100...+100
Determines how much the LFO waveform is changed
☞
Fx:020
b
LFO Phase [degree] –180...+180
Sets the LFO phase difference between the left and right
☞
c
LFO Frequency [Hz] 0.02...20.00Hz
Sets the LFO speed
☞
Fx:009,
Src
Selects the modulation source of LFO speed Off...Tempo
Amt –20.00...+20.00Hz
Sets the modulation amount of LFO speed
d
BPM/MIDI Sync Off, On
Switches between using the frequency of the LFO speed and using
the tempo and notes
☞
Fx:009,
BPM
Selects MIDI Clock and assigns tempo MIDI, 40...240
☞
Fx:009
Base Note
Selects the type of notes that specify the LFO speed
☞
Fx:009
Times x1...x16
Sets the number of notes that specify the LFO speed
☞
Fx:009
e
Depth
Sets the depth of LFO modulation 0...100
Src Off...Tempo
Selects the modulation source of the depth of modulation
Amt –100...+100
Sets the modulation amount of the depth of modulation
f
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO Phase
LFO: Tri/Sin/Vintage/Up/Down LFO Shape
Tremolo
Tremolo
Tremolo - LFO Waveform
Triangle Sine Vintage Up Down
a
Envelope Sens (Envelope Sensitivity)
Sets the envelope sensitivity of the input signal 0...100
Envelope Shape –100...+100
Sets the envelope curve shape of the input signal
b
LFO Waveform Triangle, Sine, Vintage
Selects LFO Waveform
LFO Shape –100...+100
Determines how much the LFO waveform is changed
☞
Fx:020
c
LFO Phase [degree] –180...+180
Sets the LFO phase difference between the left and right
☞
Fx:032
d
LFO Frequency [Hz]
Sets the LFO speed 0.02...20.00Hz
☞
Envelope Amount [Hz] –20.00...+20.00Hz
Sets the changes of the LFO speed according to the input signal
level
☞
e
Depth
Sets the depth of LFO modulation 0...100
☞
Envelope Amount –100...+100
Sets the changes of the modulation depth according to the input sig-
nal level
☞
f
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO Phase
LFO Shape
Envelope Sens
+ Envelope
LFO: Tri/Sin/Vintage
Envelope Shape
Tremolo
Tremolo