Nortel Networks BCM50 - Manual (Page 126)

126 Chapter 12 Configuring the BCM50 system
NN40020-302
Initial parameters overview
The initial parameters are the required parameters that you can configure using Telset
Administration, Element Manager, or the Startup Profile. See the table
Initial parameters on page
126 for a list of the initial parameters.
Table 21 Initial parameters
Parameters Telset Administration Element Manager Startup Profile
Keycode Feature 9*8 > Feature codes Configuration > System >
Keycodes
Keycode
IP address:
• Obtain dynamically
• IP address
• IP subnet mask
• Default gateway
Feature 9*8 > IP Address Configuration > System >
IP Subsystem IP Address
Modem:
• Enable/disable modem
Feature 9*8 > Modem Configuration > Resources
> Dial Up interfaces Modem
System:
• Region
Feature **PROFILE Administration > Utilities >
Reset > Cold Reset
Telephony Services System
Telephony startup:
• Template
• Start DN
Feature **STARTUP Administration > Utilities >
Reset > Cold Reset
Telephony Services Telephony Startup
Voice mail:
• Attendant DN
• UI style
• Language
• From Line
• To Line
• Number of rings
Feature 983 Configuration >
Applications > Voice
Messaging/Contact Center Voice Mail Startup
User account:
• Telset user ID (numeric)
• Telset password
(numeric)
Feature 9*8 > User Accounts Configuration >
Administrator Access >
Accounts and Privileges >
View by Accounts tab
User Account