Nortel Networks BCM50 - Manual (Page 239)

239
Installation and Maintenance Guide
Appendix N
Market profile attributes
This section describes some of the differences in the market profile attributes. These attributes are
derived from the market profile selected when you configure the system. Each market profile uses
a set of system attributes that provide specific functionality for the geographical area in which you
deploy the system.
This section covers the following main topics:
• Interface availability on page 239
• Tones and cadences on page 241
• Core parameters for market profiles on page 248
• Analog Trunk parameters on page 260
• GASM8 parameters on page 264
• GASI parameters on page 266
• ATA2 parameters on page 268
• ISDN line services on page 271
• Analog and digital trunk types on page 272
Interface availability
Some of the BCM50 interfaces are customized for a specific region and are not available to all
market profiles. Refer to the following tables for a list of interfaces available within each market
profile:
• Analog interface availability by market profile on page 240
• Digital interface availability by market profile on page 240
Analog interfaces
Analog interfaces are not supported in the following market profiles: Denmark, France, Germany,
Holland, Italy, Norway, Spain, Sweden, and Switzerland.
The symbols in Table 55 are defined as follows:
indicates full support. The interface is available and is localized in the market profile.
indicates that functionality and support is limited. The interface is available in the market
profile, but is not localized.