Nortel Networks BCM50 - Manual (Page 74)

74 Chapter 5 Installing the BCM50 system
NN40020-302
Table 16 BCM50 installation overview (Sheet 1 of 2)
Tasks Description Refer to
Prepare for installation Verify these requirements:
• environmental
• electrical
• site telephony wiring
Checking the installation
prerequisites
on page 77
Get required equipment
and tools Ensure you have these items:
• basic hardware
• optional equipment
• other hardware and tools
System equipment,
supplies, and tools
on
page 79
Inspect the components Verify that the main unit box contains all the required
components in good condition. Unpacking the main unit
on page 82
Install the main unit Mount the main unit using these options:
• in an equipment rack with a rack-mount shelf (optional
patch panel)
• on a wall with a wall-mount bracket (optional wiring field
card)
• on a desktop
Installing the main unit on
page 81
Inspect the components Verify that the expansion unit box contains all the required
components in good condition. Unpacking the expansion
unit
on page 94
Install a media bay
module (MBM) Follow these steps to install an MBM:
• set the MBM dip switches to factory default
• insert the MBM into the expansion unit
Verifying the media bay
module switch settings
on
page 94
Install an expansion unit Mount the expansion unit using the same option as the main
unit:
• in an equipment rack with a rack-mount shelf (optional
patch panel)
• on a wall with a wall-mount bracket (optional wiring field
card)
• on a desktop
• on top of another unit (not for wall-mount option)
Installing the expansion
unit
on page 97
Connect the cables Connect the cables between these items:
• main unit to expansion unit (if required)
• power supply to units (with and without a UPS)
• lines and extensions to the RJ-21 telephony connector
(optional patch panel or WFC)
• lines and extensions to the MBMs
• auxiliary equipment to the RJ-21 telephony connector
(optional patch panel or WFC)
Connecting the cables to
the BCM50 system
on
page 99