Nortel Networks BCM50 - Manual (Page 135)

Chapter 14 Using Element Manager to set the basic parameters 135
Installation and Maintenance Guide
Chapter 14
Using Element Manager to set the basic parameters
The Element Manager application provides a computer-based client interface that can connect to
devices over an IP network and display the programming interface for that device.
You can use the latest Element Manager version (for BCM50 Release 2) to manage all previous
BCM systems that require Element Manager (BCM50 Release 1 and BCM 4.0). You need only
one instance of Element Manager on your computer.
Through Element Manager, you can configure all of the basic parameters:
• Configuring the initial parameters on page 137
• Configuring the startup parameters on page 139
For more information about using Element Manager, see the Administration Guide.
The figure Overview of using Element Manager on page 135 shows an overview of using Element
Manager to set the basic parameters.
Figure 61 Overview of using Element Manager