Nortel Networks BCM50 - Manual (Page 88)

88 Chapter 7 Installing the main unit
NN40020-302
g Install two screws into the screw holes in the cable trough.
6 If the BCM50 system has only one unit, go to the procedure To install the BCM50 unit on the
wall-mount bracket on page 88.
If the BCM50 system has more than one unit, repeat steps 3 to 6 for each wall-mount bracket.
7 Go to the procedure To install the BCM50 unit on the wall-mount bracket on page 88.
To install the BCM50 unit on the wall-mount bracket
1 Insert the power supply retention clip into the BCM50 unit.
2 Slide the wall-mount lock fully to the right (unlock position). See the figure Wall-mount lock
in unlock position on page 88.
Figure 39 Wall-mount lock in unlock position
3 Align the feet on the BCM50 unit with the four holes in the wall-mount bracket. See the figure
Attach the BCM50 unit to the wall-mount bracket on page 89.