Nortel Networks BCM50 - Manual (Page 133)

Chapter 13 Using Telset Administration to set the basic parameters 133
Installation and Maintenance Guide
8 Press BACK. The Accounts screen appears.
9 Press NEXT. The password screen appears.
10 Press CHNGE to change the password.
11 Press NEXT to scroll through the list of available accounts.
12 Press CHNGE to change the password for the selected account.
13 Enter the new password for the account.
14 Enter the new password again to confirm it.
For more information about creating user accounts using Element Manager, see the procedure To
create user accounts on page 143.
Next step
After you configure the initial parameters using Telset Administration, you must configure the
startup parameters using Element Manager. For more information, see
Configuring the startup
parameters on page 139.