Startup profile requirements – Nortel Networks BCM50 User Manual
Page 146
146
Chapter 15 Using the Startup Profile to configure parameters
NN40020-302
For information about setting the initial parameters on the BCM50 system:
•
•
Startup Profile requirements
To use the Startup Profile template, you need the following:
•
a computer with a USB port
•
Microsoft Excel 2000 or newer
•
the Nortel BCM50 Startup Profile template (Microsoft Excel template)
If you do not have the Startup Profile template on your computer, you can get a copy from the
the Nortel support Web site (www.nortel.com/support) or the Administrator Applications page
on the main unit. For details about getting the Startup Profile template from the main unit, see
the procedure
To download the Startup Profile template
•
a portable USB storage device compatible with USB 1.1 (formatted for FAT32)
Note: You must format the USB storage device for the FAT32 file system. If
necessary, reformat the USB storage device by plugging it into the USB port of
your computer, right-clicking the USB device icon, and selecting FAT32
reformatting. This destroys any data on the USB.
Note: The Startup Profile works only on a BCM50 system with no keycodes loaded. After
the keycodes are loaded, the Startup Profile does not work. This condition prevents
unintentional overwriting of the parameters of a configured system.
Note: The Startup Profile template uses macros to perform certain functions. You
must set your Excel macro security level to medium or low to enable the macros:
1
From the Tools menu, select Macros.
2
Select Security.
3
Select Medium or Low.
4
Exit from Excel.
5
Open the Startup Profile template (in Excel).
6
Enable macros if you are prompted.