Create user accounts, To configure snmp community strings, To configure the snmp manager list – Nortel Networks BCM50 User Manual
Page 143: To create user accounts
Chapter 14 Using Element Manager to set the basic parameters
143
Installation and Maintenance Guide
To configure SNMP community strings
1
From the Configuration tab, click the Administrator Access folder to expand it.
2
Select SNMP from the Administrator Access folder.
3
Select the Community Strings tab.
4
Click Add.
The Add Community String dialog box appears.
5
Configure the Add Community String attributes. See the table
Add Community String
attributes
on page 143.
6
Click OK.
7
Repeat steps 4 to 6 to add more community strings.
To configure the SNMP manager list
Use the SNMP manager list to specify IP addresses that can connect to the SNMP agent.
1
From the Configuration tab, click the Administrator Access folder to expand it.
2
Select SNMP from the Administrator Access folder.
3
Select the General tab. It is normally selected by default.
4
Click Add in the SNMP Manager List area.
The Add Manager dialog box appears.
5
Enter the IP address in the Manager IP Address field.
6
Click OK.
7
Repeat steps 4 to 6 to add another manager IP address.
To create user accounts
1
From the Configuration tab, click the Administrator Access folder to expand it.
2
From the Administrator Access folder, select Accounts and Privileges.
3
Select the View by Accounts tab.
4
Click Add to add a user account.
Table 29 Add Community String attributes
Attribute
Description
Community string
Enter the name used as a key to uniquely identify an individual community
entry on the SNMP agent.
Type of access
Specify the read and write access for this community. Available options are
Read-Only and Read/Write.