Nortel Networks BCM50 - Manual (Page 89)

Chapter 7 Installing the main unit 89
Installation and Maintenance Guide
Figure 40 Attach the BCM50 unit to the wall-mount bracket
4 Press the unit against the wall-mount bracket and slide the unit down until it clicks in place.
5 Slide the wall-mount lock to the left (lock position). See the figure Wall-mount lock in lock
position on page 89.
Figure 41 Wall-mount lock in lock position
6 Use the supplied screw to secure the wall-mount lock in position.
7 Repeat steps 1 to 6 for each additional BCM50 unit you install.