Next step, Proceed to – Nortel Networks BCM50 User Manual
Page 159
Chapter 17 Connecting the BCM50 system to the LAN and WAN
159
Installation and Maintenance Guide
3
Connect one end of a standard telephone cable to the ADSL telephone line provided by your
ISP.
4
Plug the other end of the telephone cable into the WAN port.
Next step
After you connect the cables to the BCM50 system, you can test the system. For information about
testing the BCM50 system, see
Testing basic BCM50 functionality
Warning: Do not plug the WAN cable into the system unless the power supply is
connected to the main unit and an AC power source with a third-wire ground.
Note: If you use the ADSL telephone line for both ADSL and regular voice
communication, you must install a splitter filter. Your ADSL service provider supplies
the splitter filter. Follow your service provider's instructions about connecting the
splitter.