Nortel Networks BCM50 - Manual (Page 192)

192 Chapter 24 Replacing an internal component
NN40020-302
Figure 79 Remove the top of the case
6 Lift the top of the case off the BCM50 unit.
7 Proceed to Removing an internal component on page 192.
Removing an internal component
Use one of the following procedures to remove the component:
• To remove the hard disk on page 193
• To remove the fan on page 194
• To remove the router card on page 195
Warning: Protect the hardware components against damage from electrostatic
discharge. Always wear a ground wriststrap before you handle components. Always
place the components in static-free container.