Nortel Networks BCM50 - Manual (Page 127)

Chapter 12 Configuring the BCM50 system 127
Installation and Maintenance Guide
Startup parameters overview
The startup parameters are the remaining required parameters that you cannot configure using
Telset Administration. You must configure these parameters using Element Manager or the
Startup Profile. See the table
Startup parameters on page 127 for a list of the startup parameters.
Table 22 Startup parameters (Sheet 1 of 2)
Parameters Telset Administration Element Manager Startup Profile
System:
• System name
N/A Configuration > System >
Identification System
System:
• System ID
N/A Configuration > System >
Keycodes
(View ID is set
automatically and cannot
be changed)
System
Time:
• Date and Time source
• NTP server address
• Date and time
• Time zone
N/A Configuration > System >
Date and Time Time
DHCP server:
• Enable/disable server
• IP domain name
• Primary DNS
• Secondary DNS
• Default gateway
N/A Configuration > Data
Services > DHCP Server >
General Settings tab DHCP Server
IP Phones:
• Enable registration
• Enable global pwd
• Global pwd
• Auto-assign DNs
• Advertisement/Logo
N/A Configuration > Resources
> Telephony Resources >
IP & Application Sets IP Telephones
SNMP Agent:
• Enable/disable SNMP
agent
• Minimum security
• SNMP version support
N/A Configuration >
Administrator Access >
SNMP > General tab SNMP Agent
SNMP community:
• Community string
• Type of access
N/A Configuration >
Administrator Access >
SNMP > Community
Strings tab SNMP Community
SNMP manager:
• Manager IP address
N/A Configuration >
Administrator Access >
SNMP > General tab SNMP Manager