Nortel Networks BCM50 - Manual (Page 153)

Chapter 16 Completing the initial installation (optional) 153
Installation and Maintenance Guide
You must include the expansion port feature in your purchased keycode. If you activate one
expansion port only, the expansion port on the left (expansion/LAN port 2) is active.
Therefore, Expansion 1 must be connected to the active port (expansion/LAN port 2). For
location of the LAN ports, see the figure
Expansion ports on page 100 and the figure
Connecting the expansion unit to the BCM50 main unit on page 101.
5 Double-click the Module type field to display the list.
6 Select the type of MBM that you installed in the expansion unit.
7 Click Enable.
8 If you installed a second expansion unit, repeat steps 4 to 7 to enable the second MBM.
You can set other parameters for the MBMs depending on the type of MBM you installed.
Configuring modem settings
Your system modem is either enabled or disabled depending on the configuration you chose
during your basic configuration. If you use the modem for management tasks, you can customize
settings, including dial-in and dial-out settings depending on your specific needs.
For information about configuring the modem, see the Networking Configuration Guide.
Checking for software updates
Nortel frequently updates the BCM50 software. Therefore, a standard part of any installation is to
ensure your system has the latest version of the software.
For information about checking for and installing software updates, see the Administration Guide.
Configuring voice mail
Your voice mail system was initialized during the basic configuration of your BCM50 system.
You must still configure your voice mail to take advantage of the many feature available.
If you need to perform further configuration tasks, see the documentation for your voice mail
system.
For information about using the Web-based interface to configure your voice mail system, see the
CallPilot Manager Set Up and Operation Guide, and for information about using Telset
Administration to configure your voice mail system, see the CallPilot Telephone Administration
Guide.
Customizing security policies
You configured a system password and security settings during the basic configuration of your
BCM50 system. Depending on your needs, you can perform further configuration of the security
policies.