Is an rj-11 port. the figure, Wan port on a bcm50 main unit – Nortel Networks BCM50 User Manual
Page 158
158
Chapter 17 Connecting the BCM50 system to the LAN and WAN
NN40020-302
Figure 67 WAN port on a BCM50 main unit
For information about connecting the BCM50 to the WAN:
•
To connect the BCM50e or BCM50be main units to the WAN
•
To connect the BCM50a or BCM50ba main units to the WAN
To connect the BCM50e or BCM50be main units to the WAN
1
Use the Integrated Router Web GUI to configure the router card on the BCM50e and
BCM50be main units. For information about how to configure the router, see the BCM50e
Integrated Router Configuration Guide.
2
Connect one end of a standard Ethernet cable to your WAN edge device (for example, an
external ADSL modem or cable modem).
For proper setup and configuration of the device, see the documentation for your WAN edge
device.
3
Plug the other end of the Ethernet cable into the WAN port.
4
To connect the BCM50a or BCM50ba main units to the WAN
1
Use the Integrated Router Web GUI to configure the router card on the BCM50a and
BCM50ba main units. For information about how to configure the router, see the BCM50a
Integrated Router Configuration Guide.
2
Make sure the power supply is connected to the main unit and to the AC power source (wall
outlet).
WAN port
BCM50a main unit
WAN port
BCM50e main unit