Nortel Networks BCM50 - Manual (Page 147)

Chapter 15 Using the Startup Profile to configure parameters 147
Installation and Maintenance Guide
To download the Startup Profile template
1 Access the BCM50 Web page (see the procedure To access the BCM50 Web page on page
136).
2 From the Welcome to BCM Web page, click Administrator Applications.
The Administrator Applications page appears.
3 From the Administrator Applications page, click Startup Profile Template.
The Startup Profile Template panel appears.
4 Read the information on this panel.
5 Click Download Startup Profile Template on the right side of the screen, and follow the
instructions to download the template.
Configuring basic parameters
To customize a Startup Profile for your system
1 On a computer with a USB port and Microsoft Excel, open the Startup Profile template
(Microsoft Excel template).
If you do not have a copy of the Startup Profile template, see the procedure To download the
Startup Profile template on page 147.
2 For instructions about using the Startup Profile template, see the Usage Instructions tab.
3 Click the StartupProfileTemplate tab to begin entering information in the Startup Profile
template.
4 Enter your BCM50 system ID in the System ID field in the Startup Profile template.
The system ID is on the box of the main unit and on the main unit itself. If you enter the wrong
system ID, the Startup Profile does not work with your system.
5 Click the large button at the top of the Startup Profile template to save a version of the Startup
Profile (.sps file) and a version of the Startup Profile editor (Excel spreadsheet) on your
computer.
The file names for the Startup Profile editor and the Startup Profile consist of the system ID
followed by the appropriate extension.
Note: You cannot copy and paste data between cells in the Startup Profile. If you
attempt this, the data validation within the spreadsheet becomes corrupt. If
corruption occurs, download another copy of the Startup Profile template from the
BCM50 main unit.