Ricoh AP2610N - Manual (Page 198)

Troubleshooting
96
5
Cleaning the Registration
Roller
If the registration roller is dirty, a mis-
feed might occur. In this case, clean
the roller as follows:
R WARNING:
R CAUTION:
AAAA
Turn off the power switch.
BBBB
Open the front cover by pushing
the front cover release button.
CCCC
Pull the toner cartridge out of the
printer by holding the grips of the
cartridge.
Note
❒ Do not hold the toner cartridge
upside down or stand it verti-
cally.
❒ Do not put the toner cartridge
on an unstable or tilted surface.
DDDD
Wipe around the metallic regis-
tration roller by turning with a
soft damp cloth.
Important
❒ Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
• Be sure to turn off the power
switch and wait for about 30
minutes before cleaning the
registration roller. Not waiting
for the printer to cool down
can result in a burn.
• The inside of the machine could
be very hot. Do not touch the
parts with a label indicating "
v"
(means hot surface). Touching
"
v" (means hot surface) could
result in a burn.
ZCEH120J
ZGDT110J
ZCEX461J