Ricoh AP2610N - Manual (Page 426)

Using PostScript 3
4
1
FFFF
Check the sample print to confirm that the settings are correct.
If the settings are correct, see "Printing a Sample Print File" in the Printer Ref-
erence.
If not, you can delete the saved job. See "Deleting a Sample Print File" in the
Printer Reference.
How to Use Locked Print
Follow the procedures to print a document using the "Locked Print" function.
Note
❒ If the application has a collate option, make sure that it is not selected before
sending a print job. By default, locked print jobs are automatically collated by
the printer driver. If the collate option is selected in the application print dia-
log box, more prints than intended may be printed.
Windows 95/98/Me
AAAA
From an application, select the menu command to print.
The print dialog box appears.
BBBB
Open the Printer Properties to set the locked print.
CCCC
Click to select the [Setup] tab.
DDDD
Select [Locked Print] in [Job Type].
EEEE
Click [Details...].
FFFF
Enter the "User ID" in [User ID]. This can consist of up to eight alphanumeric
(a-z, A-Z, 0-9) characters. Then enter a password in [Password], up to four
digits.
Note
❒ Select this to identify the user associated with the job.
GGGG
Click [OK].
Windows 2000/Windows XP, Windows NT 4.0
AAAA
From an application, select the menu command to print.
The print dialog box appears.
BBBB
Open the Printer Properties to set the locked print.
CCCC
Click to select the [Job/ Log] tab.