Envelope feeder type 2600 – Ricoh AP2610N User Manual

Page 31

Advertising
background image

Envelope Feeder Type 2600

17

2

Envelope Feeder Type 2600

Note

❒ This unit is a tray that slides into

the optional Paper Feed Unit.
Without the optional Paper Feed
Unit, this Envelope Feeder cannot
be used.

❒ Your printer can have two optional

Paper Feed Units. However, the
Envelope Feeder must be used in
the top-most optional Paper Feed
Unit (Tray 2). It cannot be used in
the bottom-most optional Paper
Feed Unit (Tray 3).

Important

❒ Do not slide more than one paper

tray out at the same time. Having
more than one paper tray filled
with paper in a fully extended po-
sition could cause the machine to
fall down.

AAAA

Check the contents of the box for
the following items:
• Envelope Feeder
• Installation Guide

BBBB

Pull out the second paper tray
(Tray 2) of the optional Paper
Feed Unit until it stops. After that,
lift it slightly, and then pull it out.

Important

❒ The Envelope Feeder must be

used in the top-most optional
Paper Feed Unit (Tray 2).

❒ The tray of the top-most option-

al Paper Feed Unit is beneath
the paper tray.

Note

❒ Keep the paper tray with paper

in a cool dark place.

CCCC

While lifting the front side of the
Envelope Feeder, place the feeder
into the printer. Then slide it into
the printer until it stops.

Reference

For information about loading pa-
per, see "Loading Envelopes" in the
Printer Reference on the CD-ROM
labeled "Operating Instructions".

ZDDP330E

ZDDP340E

Advertising