Ricoh AP2610N - Manual (Page 79)

Installing the PostScript Printer Driver
65
4
EEEE
Click the printer description file you want to use, and then click [Select].
The PPD file is set up, and the [Adobe PS] icon appears at the left of the ma-
chine name in the list. Next, follow the procedure on p.65 “Setting up op-
tions” to make the option settings, or close the [Chooser] dialog box.
Setting up options
AAAA
On the [Apple] menu, select [Chooser].
BBBB
Click the [Adobe PS] icon.
CCCC
In the [Select the PostScript Printer:] list, click the name of the machine you
want to use, and then click [Setup].
DDDD
Click [Configure].
A list of options appears.
EEEE
Select the option you want to set up and select the appropriate setting for it.
Note
❒ If the option you want to set up is not displayed, the PPD file might not be
set up correctly. Check the name of the PPD file shown in the dialog box.
FFFF
Click [OK].
The list of options closes.
GGGG
Click [OK].
The [Chooser] dialog box appears.
HHHH
Close the [Chooser] dialog box.
Reference
For information about installing the Printer Utility for Mac, see the Post-
Script 3 Operating Instructions Supplement.