Ricoh AP2610N - Manual (Page 327)

37
4. Windows NT 4.0
Configuration
Configuring Windows NT 4.0
Printing without a Print Server
The following procedure describes how to configure Windows NT 4.0 to use the
machine on a network without a Windows 2000, Windows NT Server, Windows
NT Workstation or NetWare based print server.
AAAA
Specify the protocol to use
Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
• NetBEUI
BBBB
Configure the chosen protocol.
• See p.38 “Configuring TCP/IP and IPP for Printing”.
• See p.39 “Configuring NetBEUI for Printing”.
CCCC
Install the software and set the printer driver port
• Install SmartNetMonitor for Client from the CD-ROM labeled "Printer
Drivers and Utilities". For more information about how to install the soft-
ware and how to specify the printer driver port, see the Setup Guide.
Printing with a LPR Port
See p.46 “Configuring LPR Port Printing” for how to configure a LPR port in
Windows NT 4.0.
Printing with a Windows 2000 or Windows NT Print Server
See p.47 “Setting Up a Client Computer” for configuring Windows NT 4.0 with
a Windows 2000 or Windows NT print server.