Ricoh AP2610N - Manual (Page 228)

Making Printer Settings with the Control Panel
126
6
Output Tray You can select the default output tray. When you select "Auto
Tray Sw.", the printer automatically changes to another output
tray if an output tray becomes full. This function is available only
when the Mailbox or the 1-bin Shift Sort Tray is installed.
Standard Tray, Mailbox Tray 1, Mailbox Tray 2, Mailbox Tray 3,
Mailbox Tray 4, Upper Tray, Auto Tray Sw.
Note
❒ Default: Standard Tray
❒ Only the installed trays appear on the panel display.
Job Separation You can enable Job Separation.
• On
• Off
Note
❒ Default: Off
❒ This menu appears only when the optional 1-bin Shift Sort
Tray is installed.
Energy Saver You can set how many minutes the printer waits before switching
to Energy Saver mode. Energy Saver mode reduces electric power
consumption.
On, Off
1 minute, 5 minutes, 15 minutes, 30 minutes, 45 minutes, 60 min-
utes
Note
❒ Default: On
❒ Default: 30 minutes
❒ If there is an error with the printer, the printer will not switch
to Energy Saver mode.
❒ When the printer switches to Energy Saver mode, the Power
indicator turns off while the On Line indicator stays on.
Memory Usage You can select memory to be used from "Font Priority" or "Frame
Priority" according to the paper size, resolution or printer lan-
guage.
• Font Priority
This setting uses memory for registering fonts.
• Frame Priority
This setting uses memory for high speed printing.
Note
❒ Default: Frame Priority
Reference
For more information, see p.153 “Memory Capacity and Paper
Size”.
Unit Of Measure You can select "mm" or "inch" for the custom paper sizes.
Menu Description