Ricoh AP2610N - Manual (Page 250)

Appendix
148
7
CCCC
To avoid making your hands
dirty with toner from the transfer
roller, wear the gloves included
in the maintenance kit.
DDDD
Hold the lock levers (“
$ $ $ $” parts),
and pull them.
EEEE
Hold the green parts of the roller
on both sides, and remove the
roller from the printer as shown
in the illustration.
FFFF
Insert the new transfer roller on
the socket with the gear of the
roller positioned on the left.
Important
❒ Do not insert the roller on the
back of the socket, or the printer
might be damaged.
❒ Insert the metallic part of the
roller on the socket. If you insert
the sponge part of the roller, the
roller might be damaged.
GGGG
Push down the green parts of
both sides of the printer until it
clicks as shown in the illustration.
Note
❒ When the transfer roller is set,
the transfer roller cover will re-
turn to its original position au-
tomatically.
HHHH
Holding the grips of the toner car-
tridge, insert it into the printer
until it stops.
ZCEM200J
ZCEM210J
ZCEM220J
ZCEM221J
ZGDT120J