Ricoh AP2610N - Manual (Page 331)

Using SmartNetMonitor for Client
41
4
Using SmartNetMonitor for Client
SmartNetMonitor for Client is a utility that helps you to use network printers ef-
fectively. It is useful in environments where two or more network printers are
used. It is recommended that you install SmartNetMonitor for Client to use Par-
allel Printing and Recovery Printing. For more information about SmartNet-
Monitor for Client, see SmartNetMonitor for Client Help.
❖ ❖ ❖ ❖ SmartNetMonitor for Client features
• Sends a print job directly to the network printers without using a print
server.
• Notifies when a printing error occurs.
• Prints documents using other printers in the printer group when the spec-
ified printer is busy (Recovery Printing).
• Equally divides the number of copies to be printed among the selected
printers in the printer group (Parallel Printing).
Important
❒ The following must be the same for the specified printer and the print-
ers selected for Recovery Printing or Parallel Printing.
• Printer models (for Parallel Printing only)
• Installed options (e.g. Paper tray unit)
• Size and orientation of paper in each paper tray unit
• Total memory
• Installed fonts (including the downloaded fonts)
Note
❒ Failure to meet any of the conditions above may result in unexpected
print results.
Limitation
❒ On a computer that is used as a print server, do not use the features such as
Parallel Printing, Recovery Printing and Notify. For more information about
turning off these features, see SmartNetMonitor for Client Help.