Ricoh AP2610N - Manual (Page 359)

Setting Up a Client Computer
69
5
JJJJ
Click [OK] to close the Printer Properties, and again, open it.
KKKK
Click the [Printer Settings] tab.
LLLL
Select to clear the [Form feed] and [Enable banner] check boxes.
Note
❒ You should not select these boxes because they should be specified using
the printer driver. If they are selected, the printer might not print correctly.
When using the PostScript printer driver
Follow these steps to set up for the PostScript printer driver.
A Click the [PostScript] tab.
B Click [Advanced].
C Click to clear the [Send CTRL+D before job] and [Send CTRL+D after job] check
boxes.
MMMM
Click [OK] to close the Printer Properties.
Windows 2000
Follow the procedure to set up a Windows 2000 client.
Preparation
Log on to the NetWare file server before starting the following procedure.
AAAA
Double-click the [My Network Places] icon on the desktop and navigate to the
queue you want to use, and then double-click it.
The printers dialog box appears.
BBBB
Click [No].
CCCC
Close all the applications that are currently running.
DDDD
Insert the CD-ROM labeled “Printer Drivers and Utilities” into the CD-
ROM drive.
If the setup menu starts automatically, you can go to the next step. If not, see
the Setup Guide.
EEEE
The [Printer Installation] dialog box appears.
FFFF
From the [Port] list, select the queue you selected in step AAAA , and then click
[Next >] .
GGGG
Follow the instructions on the screen to complete the installation of the
printer driver.