Restarting the printer, Downloading postscript files, Selecting the zone – Ricoh AP2610N User Manual
Page 442: P.20 “restarting the printer, File. see p.20 “downloading postscript files, Etalk. see p.20 “selecting the zone
Printer Utility for Mac
20
2
Restarting the Printer
You can restart the printer.
AAAA
Select [Restart Printer] on the [File] menu.
BBBB
Confirm the message that appears on the screen, and then click [Restart].
The printer restarts.
Note
❒ The fonts that you downloaded in the printer's memory will be deleted.
❒ If the printer restarts, all the printer settings return to their defaults.
Downloading PostScript Files
You can download a Postscript file to the printer.
AAAA
Select [Download PostScript File...] on the [Utility] menu.
BBBB
Select the file name to download and click the file name, and then click
[Open]
.
CCCC
Type the log file name, and then click [Save].
The selected file is downloaded.
Note
❒ Errors are recorded in the log file.
Selecting the Zone
You can change the zone to which the printer belongs under Appletalk.
Important
❒ Confirm that the printer and a Macintosh are connected in an Appletalk en-
vironment.
AAAA
Select [Select Zone...] on the [Utility] menu.
The zone to which the printer belongs and the available zone list appear.
BBBB
Select the zone to which you want to switch the printer, and then click
[Change]
.
A confirmation message appears.
CCCC
Click [Continue].
A confirmation message appears.