Ricoh AP2610N - Manual (Page 377)

Using the IEEE 802.11b (Wireless LAN)
87
7
Using the IEEE 802.11b (Wireless LAN)
Preparation
Use the WiFi authorized card for an access point and the IEEE 802.11b card in
the computer.
Setting IEEE 802.11b (Wireless LAN)
Connect the printer and the computer in Ad hoc Mode. Then set up IEEE 802.11b
(Wireless LAN) according to your network environment using the following
procedure.
Limitation
❒ To connect in Infrastructure Mode, after connecting the printer and the com-
puter in Ad hoc Mode, make settings using a Web browser and telnet by fol-
lowing procedures
C to E in "Using in Infrastructure Mode".
Using in Ad hoc Mode See p.88 “Using in Ad hoc Mode”.
Using in Infrastructure Mode A See p.88 “Using in Ad hoc Mode”.
B See p.89 “Using in Infrastructure Mode”.
C See p.90 “Setting SSID”.
D See p.90 “Applying the Settings”.
E See p.91 “Confirming the Connection”.
Using WEP When using WEP, the following procedures
are required after
C, “Setting SSID”.
C-A See p.90 “Setting the WEP Key”.
C-B See p.90 “Using WEP”.