Ricoh AP2610N - Manual (Page 291)

1
1. Windows 95/98/Me
Configuration
Configuring Windows 95/98/Me
Printing without a Print Server
The following procedure describes how to configure Windows 95/98/Me to use
the machine on a network without a Windows 2000 Server, Windows 2000 Pro-
fessional, Windows NT Server, Windows NT Workstation, or NetWare based
print server.
AAAA
Specify the protocol to use
Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
• NetBEUI
BBBB
Configure the chosen protocol.
• See p.2 “Configuring TCP/IP and IPP for Printing”.
• See p.3 “Configuring NetBEUI for Printing”.
CCCC
Install the software and set the printer driver port
• Install SmartNetMonitor for Client from the CD-ROM labeled "Printer
Drivers and Utilities". For more information about how to install the soft-
ware and how to specify the printer driver port, see the Setup Guide.
Printing with a Windows 2000 or Windows NT Print Server
See p.10 “Setting Up a Client Computer” for configuring Windows 95/98/Me
with a Windows 2000 or Windows NT print server.