Ricoh AP2610N - Manual (Page 369)

Configuring the Network Interface Board with a Web Browser
79
7
❖ ❖ ❖ ❖ IPP Authentication
If using the IPP protocol, configure the authentication settings for printing
here.
❖ ❖ ❖ ❖ Paper Type
Select the paper type loaded in the machine from the drop-down menu.
❖ ❖ ❖ ❖ Password
Follow the procedure below to change the password.
Enter the password to change the network and machine settings or delete
spooled print jobs.
❖ ❖ ❖ ❖ IEEE 802.11b (Wireless LAN)
Configure the 802.11b Interface Unit settings related to communication.
Limitation
❒ This page is displayed when the 802.11b Interface Unit is installed.
Verifying the Network Interface Board Settings
AAAA
Start the Web browser.
BBBB
Point your browser at the URL or IP address of the printer (e.g. ht-
tp://XXX.XXX.XXX.XXX where the Xs are the number of the IP address).
The status of the printer you chose appears on the Web browser.
CCCC
Click [Config. Reference].
The dialog box for entering the password and user name is displayed.
DDDD
Click the item you want to check.
The following items can be checked:
❖ ❖ ❖ ❖ [General]
Shows general settings for the machine.
❖ ❖ ❖ ❖ [TCP/IP]
Shows the TCP/IP-related settings for the Network Interface Board,
802.11b Interface Unit, and 1394 Interface Unit.
❖ ❖ ❖ ❖ [NetWare]
Shows the settings for printing in a NetWare environment.
❖ ❖ ❖ ❖ [AppleTalk]
Shows the Network Interface Board or 802.11b Interface Unit settings re-
lated to the AppleTalk protocol.