Ricoh AP2610N - Manual (Page 400)

Appendix
110
7
Configuring the Network Interface Board
The Network Interface Board settings can be displayed by using the commands
below.
• telnet : Use the show command. See p.97 “Network Interface Board configu-
ration settings information” .
Item name Meaning
Common
Mode
Protocol Up/Down
AppleTalk
TCP/IP
NetWare
NetBEUI
IP over 1394 *1
SCSI print *1
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
Location
Contact
Soft switch
Up means active, Down means inactive.
Internal version number.
AppleTalk
Mode
Net
Object
Type
Zone
AppleTalk protocol in selection.
Network number.
Macintosh printer name.
The type of printer.
Name of the zone that the printer belongs to.