Destination tray, Resolution, Toner saver – Ricoh AP2610N User Manual
Page 431: Destination tray resolution toner saver
Setting up Options
9
1
Destination Tray
Use this to select the output tray.
The following table shows the tabs or menus where you can select this function.
Resolution
Use this to set the resolution to [600dpi] or [1200dpi].
The following table shows the tabs or menus where you can select this function.
Toner Saver
Use this function to reduce the amount of toner used when printing.
The following table shows the tabs or menus where you can select this function.
Note
❒ When you use Windows 2000/Windows XP/NT 4.0, this function is called
"Toner Saving".
Windows 95/98/Me
[Destination]
on the [Paper] tab.
Windows 2000/Windows XP
[Printer Features]
on [Advanced...] on the [Paper/Quality] tab
in the Printing Preferences Properties.
Windows NT 4.0
[Printer features]
on [Document Options] on the [Advanced]
tab.
Macintosh
[Destination:]
on [Printer Specific Options] in the print dia-
log box.
Windows 95/98/Me
[Advanced]
on the [Print Quality] tab
Windows 2000/Windows XP
[Printer Features]
on [Advanced...] on the [Paper/Quality] tab
in the Printing Preferences Properties
Windows NT 4.0
[Printer Features]
on [Document Options] on the [Advanced]
tab
Macintosh
[Printer Specific Options]
in the print dialog box
Windows 95/98/Me
[Toner Saver]
on the [Print Quality] tab.
Windows 2000/Windows XP
[Printer Features]
on [Advanced...] on the [Paper/Quality] tab
in the Printing Preferences Properties.
Windows NT 4.0
[Printer Features]
on [Document Options] on the [Advanced]
tab.
Macintosh
[Toner Saver:]
on [Printer Specific Options] in the print dia-
log box.