Ricoh AP2610N - Manual (Page 42)

Installing Options
28
2
Connecting the 1394 Interface
Cable to the Printer
AAAA
Attach the 1394 interface cable to
the jack on the 1394 Interface
Unit.
Both types of jack are available.
BBBB
Connect the other end of the 1394
interface cable to the computer or
the other IEEE 1394 node.
Note
❒ After installing the last option that
you want, print the configuration
page to confirm the installation. If
the new device is listed in the col-
umn of configuration options, then
it has been properly installed. For
more information about printing
the configuration page, see "Print-
ing the Configuration Page" in the
Printer Reference on the CD-ROM
labeled "Operating Instructions".
- - - -1394 Interface Unit
specifications
❖ ❖ ❖ ❖ Interface Connector:
IEEE 1394 (6 pins
× 2)
❖ ❖ ❖ ❖ Required cable:
1394 interface cable (6 pins x 4
pins, 6 pins x 6 pins)
Important
❒ You cannot plug devices togeth-
er to create loops.
❒ Do not use a cable more than 4.5
meters (14.8 feet) long.
❖ ❖ ❖ ❖ Connectable number of devices in a
bus:
Maximum 63
❖ ❖ ❖ ❖ Allowed cable hops in a bus:
Maximum 16
❖ ❖ ❖ ❖ Power supply:
Nonpower supply
Ca bl e Po we r re peat e d ( IE E E
1394a-2000 compliant)
ZGDX550J