Ricoh AP2610N - Manual (Page 319)

Using SmartNetMonitor for Client
29
3
Using SmartNetMonitor for Client
SmartNetMonitor for Client is a utility that helps you to use network printers ef-
fectively. It is useful in environments where two or more network printers are
used. It is recommended that you install SmartNetMonitor for Client to use Par-
allel Printing and Recovery Printing. For more information about SmartNet-
Monitor for Client, see SmartNetMonitor for Client Help.
❖ ❖ ❖ ❖ SmartNetMonitor for Client features
• Sends a print job directly to the network printers without using a print
server.
• Notifies when a printing error occurs.
• Prints documents using other printers in the printer group when the spec-
ified printer is busy (Recovery Printing).
• Equally divides the number of copies to be printed among the selected
printers in the printer group (Parallel Printing).
Important
❒ The following must be the same for the specified printer and the print-
ers selected for Recovery Printing or Parallel Printing.
• Printer models (for Parallel Printing only)
• Installed options (e.g. Paper tray unit)
• Size and orientation of paper in each paper tray unit
• Total memory
• Installed fonts (including the downloaded fonts)
Note
❒ Failure to meet any of the conditions above may result in unexpected
print results.
Reference
For more information about how to use SmartNetMonitor for Client,
see the "readmeXP.txt" file included on the CD-ROM labeled "Operat-
ing Instructions" (If the CD-ROM drive is D, the folder will be "D:\Net-
work\Netmon\Client\Disk1").