Ricoh AP2610N - Manual (Page 390)

Appendix
100
7
❖ ❖ ❖ ❖ Configuring the IPP user authorization
Use the following command:
ipp user
The following message appears.
Input user number (1 to 10):
Type the number, user name and password.
IPP user name:user1
IPP password:*******
After configuring the settings, the following message appears.
User configuration changed.
Direct Printing Port
The direct printing port allows printing directly from a computer, connected to
the network, to the printer.
Use the diprint command to change the direct printing port settings.
❖ ❖ ❖ ❖ View settings
The following command displays the current direct printing port settings.
msh> diprint
Example output:
port 9100
timeout=300(sec)
bidirect off
• The “Port” specifies the port number of the direct printing port.
• The “bidirect” setting indicates whether the direct printing port is bidirec-
tional.
❖ ❖ ❖ ❖ Setting timeout
You can specify the timeout interval to use when receiving data from the net-
work.
msh> diprint [0~65535]
Note
❒ The factory default is 300 seconds.
❒ If 0 is set, timeout is disabled.
❖ ❖ ❖ ❖ Bidirectional configuration for the direct printing port
Use this setting to configure whether the direct printing port is bidirectional.
The factory default is “off”.
msh> diprint bidirect {on|off}
Note
❒ If you select “on”, SmartNetMonitor for Client or Standard TCP/IP on
Windows 2000 might not work correctly.