AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 106)

SIP – DECT OM System Manual Release 2.1 6 OM Management Portal (OMP)
depl-1230/1.3 Page: 106 (196)
The following tasks can be performed:
• Create : create new unbound PP user dataset (see chapter 6.8.5).
• Configure : configure selected PP user dataset (see chapter 6.8.6).
• Delete : delete selected PP user dataset (see chapter 6.8.8).
• Select columns : select parameter columns to be shown in table (see chapter 6.8.9).
• Filter : filter PP datasets shown in table for string set in filter mask (see chapter 6.8.10).
6.8.3 “Devices” Menu
In the Devices panel, all PP device data are listed in a table. The Device panel allows to
configure the DECT part of a PP device dataset.
Devices can not be created separately. They will be automatically created during
subscription (unbound) or they will be created fixed bound to a user when a user is created in
the
Overview submenu (see chapter 6.8.1).
Note: Use the Select columns dialog (see chapter 6.8.9) to display the desired PP device
data.
The following tasks can be performed:
• Configure : configure selected PP device dataset (see chapter 6.8.6).
• Delete : delete selected PP device dataset (see chapter 6.8.8).
• Subscription : start PP subscription (see chapter 6.8.7).
• Wildcard subscription : start PP wildcard subscription (see chapter 6.8.7).
• Select columns : select parameter columns to be shown in table (see chapter 6.8.9).
• Filter : filter PP datasets shown in table for string set in filter mask (see chapter 6.8.10).