AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 43)

SIP – DECT OM System Manual Release 2.1 5 OMM Web Service
depl-1230/1.3 Page: 43 (196)
The following parameters can be configured using the OMM web service:
General settings
• Read-only community : The SNMP community strings forms a password that is sent by
the SNMP management system when querying devices. The query is answered only if the
SNMP community string matches. You may use “public” as a default keyword for read-
only access.
• System contact : Enter a descriptive text that typically is displayed in the SNMP
management software.
Trap handling
Activate the checkbox behind the
Trap Handling section to enable this feature.
• Trap community : This community string is used if the SNMP agent informs the SNMP
management system about events (Traps).
• Trap host IP address : Enter the IP Address that the SNMP agent uses to send traps.
Further notes
• The RFP needs an initial (one-time) OMM connection to receive its SNMP configuration.
In case of a reset, this configuration does not change. Changing the SNMP configuration
on the OMM forces all agents to be reconfigured.
• The agent does not support MIB-II write access, SNMPv2-MIB read/write access, NET-
SNMP-MIB read/write access, NET-SNMP-AGENT-MIB read/write access and SNMPv3.
• For background information on using SNMP with the SIP – DECT system please refer to
section 7.14.
5.4.6 “DB management” Menu
The database management (DB management) allows a flexible backup and restore
management of the OMM database. The OMM database contains all configuration settings
which are configurable via the OMM Web service interface.
The OMM database can be
• manually imported from the Web browser’s file system or from an external server (see
chapter 5.4.6.1),
• automatically imported from an external server (see chapter 5.4.6.2),
• manually exported to the Web browser’s file system or to an external server (see chapter
5.4.6.3),
• automatically exported to an external server when configuration modifications are done
(see chapter 5.4.6.4).
Note: The OMM database will be saved in a compressed file in a proprietary format. Any
modification of this file outside the OMM is not allowed.
The following protocols for the transport to or from an external server are supported:
FTP, TFTP, FTPS, HTTP, HTTPS.