AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 190)

SIP – DECT OM System Manual Release 2.1 9 Appendix
depl-1230/1.3 Page: 190 (196)
9.8 RFP Export File Format
General
RFP export files are created by OMM Management Portal in ‘csv’-file format which can be
easily viewed by a spreadsheet application. Export file contains all or a part of the following
parameters:
• MAC address
• Location name
• DECT active
• Cluster
• Paging area
• Synchronisation source
• Reflective environment
• Site
• Building
• Floor
• Room
• WLAN profile reference
• WLAN antenna
• WLAN Channel_bg
• WLAN power
• WLAN active
Example
Following example RFP export file contains all exportable RFP parameters and is re-
importable by OMM Management Portal.
##################################################
# RFP data export file: '/home/user/example.csv'
# Date: 24.09.10 Time: 15:58:19
##################################################
#
# Exported parameters:
#
# MAC address
# Name
# DECT activated
# DECT cluster
# Paging area
# Preferred sync.
# Reflective env.
# Site ID
# Building
# Floor
# Room
# WLAN profile
# WLAN antenna
# WLAN channel
# WLAN power
# WLAN activated
#
##################################################