AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 84)

SIP – DECT OM System Manual Release 2.1 6 OM Management Portal (OMP)
depl-1230/1.3 Page: 84 (196)
Advanced settings
For a description of the parameters which can be set in the
Advanced settings tab, please
refer to the description of the SIP page of the OMM Web service (see chapter 5.4.2). The
corresponding parameters can be found there in the Advanced settings page section.
RTP settings
For a description of the parameters which can be set in the
RTP settings tab, please refer to
the description of the SIP page of the OMM Web service (see chapter 5.4.2). The
corresponding parameters can be found there in the RTP settings page section.
DTMF settings
For a description of the parameters which can be set in the
DTMF settings tab, please refer
to the description of the SIP page of the OMM Web service (see chapter 5.4.2). The
corresponding parameters can be found there in the DTMF settings page section.
Supplementary services
Call forwarding/diversion : Enables or disables the OMM based call forwarding/diversion for
handset users.
Local line handling : Enables or disables the OMM based local line handling.
6.5.4 “Data management” Menu
The Data management menu provides access to data related to import and export features.
The menu provides the settings in several tabs:
• Automatic DB import (see chapter 6.5.4.1),
• Automatic DB export (see chapter 6.5.4.2),
• User data import (see chapter 6.5.4.3),
• Miscellaneous (see chapter 6.5.4.4).
6.5.4.1 “Automatic DB import” Tab
The automatic database (DB) import feature makes it easier to restore a prepared OMM
database into an OMM for an initial configuration or for update reasons.
Please note: An automatic import of a database leads to a reset of the OMM to take effect.