AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 73)

SIP – DECT OM System Manual Release 2.1 5 OMM Web Service
depl-1230/1.3 Page: 73 (196)
If there is more than one LDAP server configured then the multiple options are offered to the
user as a list. The list is presented to the user if the central directory is called e.g. via soft key
or selecting central directory from the menu. The user can choose one of the entries in the
list. The name of an entry shown in the list is configured in the OMM when creating the LDAP
server entry. (Latin-1 character set is supported).
• If there is only one LDAP server configured then the directory function is directly started
when pressing the soft key or selecting central directory from the menu.
• The name configured in the OMM is not relevant and ignored if there is only one LDAP
server configured.
• There are up to 5 LDAP directories configurable.
The OMM determines the display order of the directories in the handset menu by the order
specified by the administrator.
The following tasks can be performed on the Directory page:
• creating and changing LDAP entries (see chapter 5.9.1.1),
• deleting LDAP entries(see chapter 5.9.2.2).
5.9.2.1 Creating and Changing LDAP Servers
To configure a new LDAP entry press the New button on the Directory page.
To change the configuration of an existing entry click on the icon left behind the entry.
The
New LDAP entry resp. the Configure LDAP entry dialog opens.
1 On the LDAP entry page enter the parameters for the LDAP access, see parameter
description below.
2 Press the OK button to create or change an LDAP directory entry.