Restarting the omm, Updating the omm, 1 restarting the omm – AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN User Manual

Page 35: 2 updating the omm

Advertising
background image

SIP – DECT OM System Manual Release 2.1

5 OMM Web Service

depl-1230/1.3

Page: 35 (196)

WLAN settings
This setting applies to RFPs of the type L42 WLAN. In the

Regulatory domain

field specify

the regulatory domain of the WLAN network. This setting depends on the country and is
prescribed by the laws of that country. Only the setting prescribed for that country must be
used. For more information on the WLAN settings please refer to the sections 5.8 and 7.13.

Date and time
If an SNTP is configured the date and time of the configured time zone can by synchronized
with the DECT 142 / Aastra 142d and 6xxd handsets. The rules for a time zone, which is
shown on this web page, can be configured in the

Time zones

menu (see chapter 5.4.4).

Select the desired zone in the

Time Zone

field.

Notes on System Wide SOS And ManDown Numbers
System wide SOS and ManDown numbers for SOS (142d, 620d, 630d) and sensor initiated
calls (630d) can be configured within the SOS and ManDown alarm trigger settings. Please
see section 6.9.3.

These numbers are used for SOS and ManDown calls if no user specific number is set.

5.4.1.1 Restarting the OMM

To restart the OMM call up the

System settings

web page and press

Restart

. There is also

the option to reset the configuration data.

A reset web page is loaded then displaying a progress bar and the login web page is loaded
automatically if the OMM is reachable again.

5.4.1.2 Updating the OMM

If the OMM is running on an RFP, the

Update

button is available on the

System settings

web page. After pressing the

Update

button, the RFP residing the OMM checks whether a

new boot image file is available on the TFTP server or not. For more details about updating
the OMM see the section 7.10.

Advertising