AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 26)

SIP – DECT OM System Manual Release 2.1 4 Licensing
depl-1230/1.3 Page: 26 (196)
4.2 Uploading an Activation or License File
An activation or a license file must be purchased from the Aastra license server. The license
confirmation you received contains detailed information how to generate an activation /
license file. The file can be uploaded into the OMM either via Web service (see chapter 5.10)
or via the OMP (see chapter 6.10).
An activation file as well as a license file contain a PARK for system identification. If the
newly imported PARK differs from the current PARK, the OMM will perform a reset.
Note: The file can be opened with a text editor to view the license or activation parameter.
4.3 Demonstration Mode
When an OMM comes up for the first time, it considers itself as working in demonstration
mode. In this mode all of the OMM features can be evaluated without any license for 72
hours starting with the 1
st RFP being connected to the OMM.
Display of demonstration mode in the OM Web service
After 72 hours the OMM restricts all features as described in section 4.1.2.
The OMM stays in demonstration mode as long as the default built-in PARK is not changed.
The PARK can be changed either on the
System settings page as described in section
5.4.1. This leads to a small system using the built-in license. Another way to change the
PARK is to upload an activation or license file purchased from the Aastra license server (see
chapter 4.1.1). This leads to a medium system or large system respectively.
Note: Multiple OMMs running the Demo license at the same location can influence each
other because of the same PARK!
4.4 License Modes
4.4.1 Built-in License (Small System)
When changing the PARK on the System settings page of the OM Web service, the OMM
uses the built-in license. The built-in license features:
• up to two L-RFPs