AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 146)

SIP – DECT OM System Manual Release 2.1 7 Configuration und Administration Aspects
depl-1230/1.3 Page: 146 (196)
7.9 Installing OMM in Host Mode
In this case the OMM software has to be installed on a PC running with Red Hat Linux. The
network parameters with which the OMM works in this mode depend on this PC’s network
configuration.
Once started, OMM works permanently on the PC. In case of fatal error or PC restart, OMM
will restart automatically.
Please note: Check that the versions of the OMM and RFP software on your SIP – DECT
installation are the same.
7.9.1 System Requirements
The Linux PC OMM requires the following configuration:
• Red Hat Enterprise Linux Server release 5.4
• Server HW minimum:
- Processor : Dual Core Intel® Xeon® 3065, 2.33GHz, 4MB cache
- Bus 1333 MHz
- Memory : 2GB DDR2 SDRAM 667 MHz
- Hard disk: 80 GB SATA 7200 rpm
- 1 Gbit/s Ethernet interface
7.9.2 Installing the OMM Software
The OMM software for Linux Redhat PC is provided in form of a self-extracting executable
file “omm_ffsip_install.bin”. This binary file comprises two Red Hat packages:
• omm_ffsip-OMM-<omm-version>.i586.rpm
OpenMobility Manager software.
• omm_ffsip-6xxd-<handset-version>.i586.rpm
Software for Aastra 610d/620d/630d handsets
The Aastra 610d/620d/630d handset software can be updated via the Air interface, see
chapter 7.15. A separate software package can also be provided for specific updates of the
handset software.
IMPORTANT : Log on as user root to install and/or update OMM. If you do not login as
root to open the OMM console, the path to ommconsole is not set and
you have to enter the whole path “/usr/sbin/ommconsole” to start the
OMM console.
Command syntax
For extraction and automatic standard installation
omm_ffsip_install.bin
For extraction and automatic standard installation
omm_ffsip_install.bin -f