AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 99)

SIP – DECT OM System Manual Release 2.1 6 OM Management Portal (OMP)
depl-1230/1.3 Page: 99 (196)
Remove selected : remove selected RFP datasets from table. If the table is empty after
removing of datasets, the table will be hidden. For selection activate the corresponding
checkboxes in the RFP table.
Show status : show import status of a selected RFP dataset. If enrolment failed for this
RFP, a message describing the enrolment error is shown.
6.7.4 “Export” Menu
The Export menu allows export of all RFPs enrolled to the OMM into an file using “*.csv” file
format. The created file can be viewed externally with a standard spreadsheet application.
All enrolled RFPs are shown in a table.
The following tasks can be performed:
• Export all : export all RFP datasets.
• Export selected : export selected RFP datasets.
• Select parameters : select RFP parameters which shall be written to csv file (select all
RFP parameters or a subset of these parameters).
• Select columns : select the columns thst shall be written to the csv file.
When the export is started, a file system dialog will be opened and the export file name can
be selected. If all parameters are selected for export, the export file can be re-imported using
Enrolment (see chapter 6.7.3). For information about RFP export file format see Appendix,
capter 9.8).
6.7.5 “Sync view” Menu
The Sync view menu allows to check the synchronization relations between RFPs in a
graphical manner.
Note: For background information on RFP synchronization please refer to chapter 7.2.