Selecting the right dhcp server, Rfp led status, 2 selecting the right dhcp server – AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN User Manual
Page 132: 5 rfp led status

SIP – DECT OM System Manual Release 2.1
7 Configuration und Administration Aspects
depl-1230/1.3
Page: 132 (196)
17
Belarus
18
Estonia
19
Latvia
20
Lithuania
21
Ukraine
22
Norway
24
Sweden
25
Taiwan
100
North America
101
France
102
Australia
7.5.4.2 Selecting the Right DHCP Server
The DHCP client requests its own IP address using code 50. The DHCP client will select the
DHCP server that offers the currently used IP address. Additionally the mandatory options
must be offered otherwise the DHCP offer is ignored by the DHCP client.
If no matching reply was received, the DHCP client resends the request 2 times after
1 second. Then the DHCP client will wait for 1 minute before resending 3 requests again.
If the DHCP client cannot accept an DHCP offer within 3 minutes the RFP is rebooted.
7.5.5
RFP LED Status
RFP 32 IP / RFP L32 IP / RFP 32 NA
RFP L42 WLAN / RFP 42 WLAN
LED 1 Info / Booter; LED 2 System;
LED 3 DECT; LED 4 (unused)
LED 1 Info / Booter; LED 2 System
LED 3 DECT; LED 4 WLAN