AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 14)

SIP – DECT OM System Manual Release 2.1 2 Getting Started
depl-1230/1.3 Page: 14 (196)
Also, you need the firmware file for the RFP inside the virtual machine. You can copy via
network e.g. by using SCP, FTP, SMB etc. To keep things simple, the virtual machine used
in this example has a second CD-ROM that points to the hardware CD-ROM drive that in
turn has the OMM-SIP installation medium inserted.
Second CD-ROM with VirtualBox
The following steps will start the virtual machine where you can configure and run the
DHCP/TFP server program.
1 Start the virtual machine. The Linux desktop should be displayed after start-up. The
following screenshot depicts the situation if you start VirtualBox with a Live CD Linux
(CentOS 5.5 to be precise).
CentOS LiveCD, copy files, calling up a terminal
2 On the virtual machine’s desktop, double click the OMM-SIP CD-ROM. Use drag & drop
to copy the “omm_ffsip.tftp” and “aafon6xdd.dnls” files to the Linux desktop.